Fig. 1 — Pokerwright Classic, wave band, 40 mm.
Shape everychip.
40 mm · 10.3 g · 3 inlaid colours · PLA, printed in the EU
01 — The edge
Look at the edge.
The rim is built in the same pass as the chip, one 0.2 mm layer at a time, in a second colour. You can feel it. You cannot peel it.
Four periods.
0.7 mm amplitude.
Inlaid 1 mm deep, not printed on.
Fig. 2 — Wave band, 4 periods, 0.7 mm amplitude, inlaid 1.0 mm.
Fig. 3 — Slanted spots.
Fig. 4 — Barcode.
Fig. 5 — Diamonds.
Fig. 6 — Double wave.
02 — The weight
Weight you can feel.
A metal core sits in a pocket between two skins. The standard core takes a chip from about 5 g to about 10.3 g. The skin on each side is at least 0.6 mm, so the metal stays sealed in.
Assembled weight
0.0 g
Fig. 7 — Standard core, exploded along the chip axis.
- Top skin, 0.8 mm
- Face inlay, 0.4 mm
- Core pocket, 1.8 mm
- Metal core, Ø 25.2 × 1.8 mm
- Bottom skin, 0.8 mm
- Assembled weight: 10.3 g
03 — The colours
Every value, its own colour.
Each value takes a body colour and an inlay colour from 99 filaments. Change the palette and the whole set follows, chip by chip.
Fig. 8 — Palette: Classic.
Fig. 8 — Palette: Nordic.
Fig. 8 — Palette: Royal.
- 5
- 10
- 20
- 50
- 100
04 — The set
300 chips. One case.
Five channels of sixty. The lid holds the dealer and blind buttons and carries your engraving.
Fig. 9 — Carry case, 300 chips in five channels of 60.
05 — Made one plate at a time
Made one plate at a time.
Every set is printed to order on our own printer, by one person, from your file.
01
Design
You choose the face, the rim, the colours and the core. The designer checks every wall against what the printer can make before you can order.
Fig. 10 — The face, drawn from the pattern library. 02
Print
A Bambu Lab P2S builds the chips from the bottom up in 0.2 mm layers, with up to three colours in each chip.
Fig. 11 — Rim detail, wave band, layer lines visible. 03
Seat the core
The printer pauses with the pocket open. The metal disc is placed by hand and the print resumes, closing the skin over it.
Fig. 12 — The core pocket and its metal disc. 04
Check and pack
Each set is checked and packed by hand before it ships. Expect 0.2 mm layer lines on the rim and sizes within ±0.3 mm.
Fig. 13 — A set packed in its carry case.
06 — Preset sets
Start from a finished set.
12 complete designs. Open one in the designer and change anything.
All presetsPokerwright Classic
From €205.00300 chips · 5 values
Ripple
From €205.00300 chips · 5 values
Casino Dice
From €211.00300 chips · 5 values
Black Label
From €234.00250 chips · 4 values
Harlequin
From €190.50250 chips · 4 values
Rain
From €211.00300 chips · 5 values
Studio
From €186.50250 chips · 4 values
Royal
From €259.00300 chips · 5 values
Cash Game
From €336.25500 chips · 5 values
Tournament 1000
From €345.75500 chips · 5 values
Sunrise
From €205.00300 chips · 5 values
Home Game
From €205.00300 chips · 5 values
Fig. 14 — Preset stacks; hover or focus one to turn it in 3D.
07 — Edge library
13 edges.
Each rim pattern is cut into the wall of the chip. Pick one to see it on a stack, or open the designer with it chosen.
08 — Spec sheet
The numbers.
Millimetres, grams and degrees Celsius. Weights are for a finished chip and are approximate.
All specs| Chip | ||
|---|---|---|
| Diameter | 39 / 40 / 43 mm | |
| Thickness | 3.3 / 3.4 / 3.5 mm | |
| Tolerance | ± 0.3 mm | |
| Layer height | 0.2 mm | |
| Colours per chip | up to 3 | |
| Core and weight | ||
| No core | ≈ 5 g | |
| Standard core | ≈ 10.3 g | |
| Heavy core | ≈ 11.5 g | |
| Skin over a core | ≥ 0.6 mm | |
| Inlay | ||
| Face inlay depth | 0.4 mm | |
| Rim inlay depth | 0.6 – 1.5 mm | |
| Thinnest detail | 0.8 mm | |
Your table. Your chips.
Fig. 16 — Classic palette on felt. Click the felt to toss a chip.